⚓ Default boot
| CF BOOT CONFIG | ||
|---|---|---|
| 1-3 & 4-6 | PROMJET_CS# | FLASH0_CS# |
| 1-3 & 5-6 | PROMJET_CS# | FLASK1_CS# |
| 3-4 & 5-6 | FLASH0_CS# | FLASH1_CS# |
| 3-5 & 4-6 | FLASK1_CS# | FLASK0_CS# |
Default jumpers, resistor on: 3-4 & 5-6 (FLASH0_CS#|FLASH1_CS#)
Remove jumper 5-6 to get prompt of u-boot.
⚓ Boot log
[... .i2c_write ...]
## No elf image at address 0x0e000000
Octeon#
U-boot 5.0.2.12 (Production build) (Build time: Nov 20 2008 - 16:16:28)
OCTEON SNWL_GOMBE-4 CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 256 MB
Flash: 32 MB ( Bank 0: 16 MB Bank 1: 16 MB )
.i2c_write: octeon 3 byte data write error
Uncompressed 0x181d88 bytes
ELF file is 32 bit
Allocating memory for ELF: Base addr, 0x2000000, size: 0xe000000
Loading .text @ 0x82008000 (1389536 bytes)
Loading .data @ 0x8215c000 (178688 bytes)
Loading .cvmx_shared @ 0x82187a00 (416 bytes)
Clearing .bss @ 0x82187c00 (1194416 bytes)
## Loading ELF image with entry point: 0x82008000 ...
Bootloader: Done loading app on coremask: 0x1
Enabling Octeon big bar support