⚓ Intro
I collection a lot of old hardware, RX, TRX or other (teletypes, amplifiers, …), I try for each to document them on this wiki (you can find more in the menu on the left) or a dedicated website more oriented about tech specs sheets here and to make them work and repairs as much as I can.
⚓ Current “shack”
This is my main computer bench with my radios I uses. Actually a Kenwood TS-850S (on the left) connected to MFJ-929 that switches between my EFHW and a Dummy Load. Not shown on the right is a Xiegu G90.
My SDR Rack in the workshop/hut.
SDRs are used for various purposes, ADS-B, AIS, APRS, HF/Qo100 through a WebSDR, etc.
My DIY CAT interface I use with my main rigs.
⚓ Electronic Workbench
It’s my main workbench, with soldering/reflow station, oscilloscope, signal generators, logic analyzer, and a screen connected to a computer.
⚓ Various hardware
WIP Mast installation.
Sagem SPE 5-A Teletype.
Top to bottom: LHP 219 HF 2-30MHz TRX, R5A HF RX 1.5-22MHz, EKB HF RX 1.5-22MHz clone of R5A.
An Hagenuk E75 (specs) Marine receiver, 100kHz to 4600kHz.
UM-2 HF amp, 20-46.1MHz 10W, 46-61MHz 7W.
R109 HF TRX, FM, 21.5-28.5MHz.
R-107 HF TRX, FM, 20-36-52MHz.
R-871 U/VHF RX, 220-389.9MHz.
TeKaDe FSE 38/58, VHF TRX, FM, crystal fixed.
RF-10 test set.
R 107M VHF TRX, 20-52MHz, FM/CW.
FRdx500 HF RX, 1.7-29.1MHz.
R-33 M VHF TRX, 30-79.9MHz, FM.