Installed in Rack 2U (001)
⚓ J3 remote connector
pin | signal | name and description |
---|
1 | +5VRMT | +5 Vdc Power. Fused through fuse F1; +5 Vdc power to a user-supplied external connection. |
2 | LANLED* | LAN LED. Signal goes low when the LAN LED illuminates. |
3 | FUSELED* | RPWR LED. Signal goes low when the FUSE LED illuminates. |
4 | SCSILED* | SCSI LED. Signal goes low when the SCSI LED illuminates. |
5 | VMELED* | VME LED. Signal goes low when the VME LED illuminates. |
6 | | 10Kohm pullup line |
7 | RUNLED* | RUN LED. Signal goes low when the RUN LED illuminates. |
8 | STATLED* | STATUS LED. Signal goes low when the STATUSLED illuminates. |
9 | FAILLED* | FAIL LED. Signal goes low when the FAIL LED illuminates. |
10 | | 10Kohm pullup line, I/I TTL ? |
11 | SCONLED* | SCON LED. Signal goes low when the SCON LED illuminates. |
12 | ABORTSW* | ABORT Switch. Signal goes low when the ABORTswitch is pressed. It may be forced low externally for a remote abort. |
13 | RESETSW* | RESET Switch. Signal goes low when the RESETswitch is pressed. It may be forced low externally for a remote reset. |
14 | GND | GND |
15 | GND | GND |
16 | | 10Kohm pullup line, I/O TTL ? |
17 | | Not used |
18 | IRQ | Interrupt Request. General-purpose interrupt input line. |
19 | ??? | ??? |
20 | GND | GND |
⚓ Useful commands
command | desc |
---|
ENV;D | reset environment |
NIOT | configuration of network |
IOI | list SCSI devices |
NBO | network boot |
BO 0 50 | boot scsi hdd |
BO 0 60 | boot scsi floppy (dead) |
⚓ NIOT
167-Diag>niot
Controller LUN =00?
Device LUN =00?
Node Control Memory Address =FFE10000?
Client IP Address =0.0.0.0? 10.0.0.2
Server IP Address =0.0.0.0? 10.0.0.1
Subnet IP Address Mask =255.255.255.0?
Broadcast IP Address =255.255.255.255?
Gateway IP Address =0.0.0.0?
Boot File Name ("NULL" for None) =? netboot.mvme68k
Argument File Name ("NULL" for None) =? bsd.rd
Boot File Load Address =001F0000? 006F0000
Boot File Execution Address =001F0000? 006F0000
Boot File Execution Delay =00000000?
Boot File Length =00000000?
Boot File Byte Offset =00000000?
BOOTP/RARP Request Retry =00?
TFTP/ARP Request Retry =00?
Trace Character Buffer Address =00000000?
BOOTP/RARP Request Control: Always/When-Needed (A/W)=W?
BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y?
Update Non-Volatile RAM (Y/N)? y
⚓ ENV
Network Auto Boot Configuration Parameters Pointer (NVRAM) = 0FFFC000? FFFC0080